Thefoda karfe sassaana amfani da su a cikin kayan aikin gida, kayan aikin wuta da na'urorin ɗinki sun zama ruwan dare gama gari. Idankayayyakin karafaza a iya yaɗa shi a cikin firji, magoya bayan injin wanki, da injunan ɗinki, fa'idodin fasaha da tattalin arziki za su yi yawa sosai.
Fiji na gida, kwandishan, magoya bayan wutar lantarki, injina, injin wanki, injin tsabtace ruwa, masu sarrafa abinci, masu shavern lantarki, busar gashi, injin lantarki, masu rikodin tef, masu rikodin bidiyo, sauti mai haɗawa, da sauransu, sune mafi yawan amfani da su a cikin kayan aikin gida kuma suna da makawa The foda ƙarfe ƙarfe sassa ne sintered karfe (sintering-ruwan sarrafa foda).foda karfesassa na tsarin da aka yi amfani da su a samfuran wakilai da yawa kamar injin wanki, damfarar firji na gida, da magoya bayan lantarki.
A farkon shekarun 1970s, Kamfanin General Electric na Amurka ya canza sassa biyu na yanke karfe a cikin watsa na'urar wanki ta atomatik zuwa "fasaha na karfe". Wadannan sassa guda biyu sune bututun kullewa da bututun juzu'i.
Bututun ƙarfe da aka sake fasalin foda yanki ne guda ɗaya. Kodayake jimlar kaurin bango a ƙananan ƙarshen ya ragu, yana da isasshen ƙarfin aiki mai ƙarfi kuma yana da sauƙin ƙira.
Jimlar kauri na bangon bututun jujjuya yana raguwa, ta yadda kaurin bangon bututun da aka kulle ya karu, wanda ke sa bututun da aka kulle foda ya sami ƙarfin aiki da ake buƙata.
An yi bututun ƙarfe na foda guda ɗaya da foda ƙarfe ƙarfe F-0008-20, tare da yawa na 5.9-6.1 a kowace murabba'in santimita. Foda metallurgy karfe na wannan yawa yana da isasshe high tsarin ƙarfi. Siffar da ke tattare da tsarin ƙarfe na foda shine cewa sassan da aka samar suna da girman da ake buƙata da rashin daidaituwa na farfajiyar ɗamarar. Abokan aiki zasu iya ba da ƙarfin goyan bayan tsari da ya dace don tuƙi da bututun kullewa. Iyakar aiki na gaba shine yanke ƙaramin chamfer akan babban diamita na waje.
Thefoda karfe kulle sassatube dakin da aka yi da foda metallurgy jan karfe karfe FC-0205-40. Yawan abu shine 6.8-7.2g a kowace murabba'in santimita. Bugu da ƙari na jan karfe da yawa ya fi na bututun juzu'i don sanya yankin daraja ya sami isasshen ƙarfin tasiri kuma yana da juriya ga riko na bazara. Halayen fasaha na ƙarfe na foda sune madaidaicin juzu'i na girma, sassauƙan sassa na sassa, kuma ana iya samar da incisions na flange ta latsa ba tare da aiki na gaba ba.
Bututun makullin ƙarfe na foda da aka sake tsarawa da bututun juzu'i sun tanadi sama da dalar Amurka 250,000 a shekara, wanda ke haɓaka ingancin watsawa sosai.
Lokacin aikawa: Dec-31-2021