DAYA.MIM singing
Karfe allura gyare-gyare tsari yafi hada da samfurin zane, mold zane, ingancin gwaji, hadawa, gyare-gyare, degeneasing, sintering, sakandare aiki da kuma sauran 8 muhimmanci links, JH MIM za a iya musamman degreasing da sintering kayan aiki bisa ga abokin ciniki samfurin da tsari bukatun, kuma za a iya hadedde tare don samar da injin degreasing da sintering hadedde kayan aiki.
1, graphite thermal filin injin lalata sintering hadedde kayan aiki;
Abubuwan da suka dace:
Iron nickel gami, mafi bakin karfe (17-4ph, 316L, PANACEA, da dai sauransu), mutu karfe, high gudun karfe, da dai sauransu
Jiehuang MIM yayi da wadannan mafita ga irin baƙin ƙarfe-nickel gami, bakin karfe (17-4ph,316L, PANACEA, da dai sauransu), mutu karfe, high gudun karfe, da dai sauransu.
| ID | Saukewa: VHS4415 |
| Lambar samfurin | VHSgr-40/40/150-1600 |
| Tazarar aiki mai inganci (mm) | 400×400×1500(mm) |
| Girman nauyi | 300KG |
| Ƙarfin dumama / jimlar iko | 240KW/280KW |
| Zazzabi ƙira | 1600 ℃ |
| Yanayin aiki | 1550 ℃ |
| Yanayin sarrafa zafin jiki | Kula da zafin jiki guda biyu |
| Haɗin yanayin zafi mai girma | ≤±3℃ |
| Yawan dumama | 15 ℃/min (≤1000℃) 10 ℃/min (1000-1550 ℃) |
| Iyakance injin | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa |
| Matsakaicin zubewar ruwa | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa/h |
| Yawan amfanin ƙasa | ≥98 ﹪ |
| Yawan sanyi (cikakken tanderu)
(Cooling ruwa mashiga ruwa zazzabi ≤30 ℃, tanderu matsa lamba 9bar) | 1450 zuwa 100 digiri, 5 zuwa 7 hours |
2, karfe zafi filin injin lalata sintering hadedde kayan aiki;
Abubuwan da suka dace
Low-carbon bakin karfe, titanium gami (Ti, TC4), jan karfe gami, tungsten gami, superalloy (718, 713), da dai sauransu
Jiehuang MIM ne jerin kayan: low-carbon bakin karfe, titanium gami (Ti, TC4), jan karfe gami, tungsten gami, superalloy (718, 713), da dai sauransu Mun samar da wadannan mafita:
| Lambar samfurin | VHS4412-M |
| Lambar samfurin | VHSmo-42/45/125-1600 |
| Tazarar aiki mai inganci (mm) | 420×450×1250(mm) |
| Girman nauyi | 300KG |
| Ƙarfin dumama / jimlar iko | 240KW/280KW |
| Zazzabi ƙira | 1600 ℃ |
| Yanayin aiki | 1550 ℃ |
| Yanayin sarrafa zafin jiki | Kula da zafin jiki guda biyu |
| Haɗin yanayin zafi mai girma | ≤±3℃ |
| Yawan dumama | 15 ℃/min (≤1000℃) |
| Iyakance injin | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa |
| Matsakaicin zubewar ruwa | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa/h |
| Yawan amfanin ƙasa | ≥98 ﹪ |
| Yawan sanyi (cikakken tanderu)
(Cooling ruwa mashiga ruwa zazzabi ≤30 ℃, tanderu matsa lamba 9bar) | 1450 zuwa 100 digiri, 8 zuwa 10 hours |
GUDA BIYU, MIM matsa lamba rage rage sintering
Tsari kwarara da gabatarwa
Nufin rashin ƙarancin ƙarancin ƙarancin injin sarrafa samfuran, an ɓullo da tanderun da aka haɗa da matsa lamba, wanda zai iya haɓaka ƙarancin samfuran a babban zafin jiki ta hanyar matsa lamba mai ƙarfi.
1, 1MPa graphite thermal filin injin matsa lamba degreasing sintering hadedde kayan aiki;
Abubuwan da suka dace:
Tungsten carbide, titanium carbide, tantalum carbide, da dai sauransu.
Jiehuang MIM1MPa matsa lamba degreasing sintering bayani dalla-dalla:
| ID | Saukewa: PHS4412-1 |
| Lambar samfurin | PHSgr-40/40/120-1600 |
| Tazarar aiki mai inganci (mm) | 400×400×1200(mm) |
| Girman nauyi | 600KG |
| Ƙarfin dumama / jimlar iko | 240KW/280KW |
| Tsarin ƙira | 1MPa |
| Matsin aiki | 0.96MPa |
| Zazzabi ƙira | 1600 ℃ |
| Yanayin aiki | 1550 ℃ |
| Yanayin sarrafa zafin jiki | Kula da zafin bel guda uku |
| Haɗin yanayin zafi mai girma | ≤±5℃ |
| Yawan dumama | 15 ℃/min (≤1000℃) |
| Iyakance injin | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa |
| Matsakaicin zubewar ruwa | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa/h |
| Yawan amfanin ƙasa | ≥98 ﹪ |
| Yawan sanyi (cikakken tanderu)
(Cooling ruwa mashiga ruwa zazzabi ≤30 ℃, tanderu matsa lamba 9bar) | 1450 zuwa 100 digiri, shida zuwa takwas hours |
2, 6MPa graphite thermal filin injin matsa lamba degreasing sintering hadedde kayan aiki;
Abubuwan da suka dace
Tungsten carbide, titanium carbide, tantalum carbide, da dai sauransu.
Jiehuang MIM 6MPa matsa lamba degenreasing sintering bayani dalla-dalla:
| ID | Saukewa: PHS4412-6 |
| Lambar samfurin | PHSgr-40/40/120-1600 |
| Tazarar aiki mai inganci (mm) | 400×400×1200(mm) |
| kaya mai nauyi | 600KG |
| Ƙarfin dumama / jimlar iko | 300KW/340KW |
| Tsarin ƙira | 6MPa |
| Matsin aiki | 5.80MPa |
| Zazzabi ƙira | 1600 ℃ |
| Yanayin aiki | 1550 ℃ |
| Yanayin sarrafa zafin jiki | Kula da zafin bel guda uku |
| Haɗin yanayin zafi mai girma | ≤±5℃ |
| Yawan dumama | 15 ℃/min (≤1000℃) |
| Iyakance injin | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa |
| Matsakaicin zubewar ruwa | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa/h |
| Yawan amfanin ƙasa | ≥98 ﹪ |
| Yawan sanyi (cikakken tanderu)
(Cooling ruwa mashiga ruwa zazzabi ≤30 ℃, tanderun matsa lamba 50bar) | 1450 zuwa 100 digiri, 6 zuwa 8 hours |
3, 10MPa graphite thermal filin injin matsa lamba degreasing sintering hadedde kayan aiki;
Abubuwan da suka dace
Tungsten carbide, titanium carbide, tantalum carbide, da dai sauransu.
Jiehuang MIM 10MPa matsa lamba rage sintering bayani dalla-dalla:
| ID | Saukewa: PHS4412-10 |
| Lambar samfurin | PHSgr-40/40/120-1600 |
| Tazarar aiki mai inganci (mm) | 400×400×1200(mm) |
| kaya mai nauyi | 600KG |
| Ƙarfin dumama / jimlar iko | 370KW/410KW |
| Tsarin ƙira | 10MPa |
| Matsin aiki | 9.50MPa |
| Zazzabi ƙira | 1600 ℃ |
| Yanayin aiki | 1550 ℃ |
| Yanayin sarrafa zafin jiki | Kula da zafin bel guda uku |
| Haɗin yanayin zafi mai girma | ≤±5℃ |
| Yawan dumama | 15 ℃/min (≤1000℃) |
| Iyakance injin | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa |
| Matsakaicin zubewar ruwa | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa/h |
| Yawan amfanin ƙasa | ≥98 ﹪ |
| Yawan sanyi (cikakken tanderu)
(Cooling ruwa mashiga ruwa zazzabi ≤30 ℃, tanderun matsa lamba 50bar) | 1450 zuwa 100 digiri, 5 zuwa 7 hours |
UKU, CIM yanayin matsa lamba sintering
Graphite thermal filin injin lalata kayan aikin haɗin gwiwa;
Tsarin gyare-gyaren yumburayafi hada da samfurin zane, mold zane, ingancin gwaji, hadawa, forming, degenreasing, sintering, sakandare aiki da sauran 8 muhimmanci links, Jiehuang MIMiya siffanta ragewa da sintering kayan aiki bisa ga abokan ciniki' samfur da kuma tsari bukatun, kuma za a iya hade tare don samar da injin lalata da sintering hadedde kayan aiki.
Abubuwan da suka dace
Zirconia, alumina, silicon nitride, silicon carbide, da dai sauransu;
Maganin Jiehuang CIM shine kamar haka:
Babban fasali sune kamar haka:
- Za'a iya shirya samfuran tare da sifofin geometric masu rikitarwa kyauta kuma kai tsaye.
- The forming sake zagayowar ne takaice, kawai dubun daya-dari na zuba da zafi latsa gyare-gyaren lokaci, da ƙarfi na billet ne high, da samar da za a iya sarrafa kansa, da kuma management da kuma kula da samar da tsari ne ma dace, dace da taro samar.
- Saboda kyawun ruwa mai ɗaure, yawan adadin billet ɗin allura ya yi daidai.
- Saboda ƙarin ƙarin ɗaure a cikin gyare-gyaren allura, lokacin raguwa yana da tsayi, musamman ga samfuran da ke da kauri mai girma, lokacin ragewa na iya zama tsawon sa'o'i 100-200.
- Saboda foda da ɗaure mix ne sosai uniform, da rata tsakanin foda ne sosai kananan, da shrinkage halaye a cikin sintering tsari ne m guda, don haka samfurin yana da uniform yawa a duk sassa da high geometric daidaito.
- Girman yanki mai inganci: 400X400X1500mm
- Daidaita yanayin zafi: ± 3 ℃
| ID | Saukewa: VHS4415 |
| Lambar samfurin | VHSgr-40/40/150-1800 |
| Tazarar aiki mai inganci (mm) | 450×450×1500(mm) |
| Girman nauyi | 300KG |
| Ƙarfin dumama / jimlar iko | 240KW/280KW |
| Zazzabi ƙira | 1800 ℃ |
| Yanayin aiki | 1750 ℃ |
| Yanayin sarrafa zafin jiki | 2 yankuna |
| Haɗin yanayin zafi mai girma | ≤±3℃ |
| Yawan dumama | 15 ℃/min (≤1000℃) 10 ℃/min (1000-1550 ℃) |
| Iyakance injin | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa |
| Matsakaicin zubewar ruwa | Sanyi, fanko, tanderu mai tsafta, ≤ 2Pa/h |
| Yawan amfanin ƙasa | ≥98 ﹪ |
| Yawan sanyi (cikakken tanderu)
(Cooling ruwa mashiga ruwa zazzabi ≤30 ℃, tanderu matsa lamba 9bar) | 1450 zuwa 100 digiri, 5 zuwa 7 hours |
Lokacin aikawa: Dec-06-2023