ONE.MIM sentering
Ts'ebetso ea ho bopa ente ea tšepe haholo-holo e kenyeletsa moralo oa sehlahisoa, moralo oa hlobo, tlhahlobo ea boleng, ho kopanya, ho bōpa, ho senya, ho sila, ho sebetsa ha bobeli le lihokelo tse ling tsa bohlokoa tsa 8, JH MIM e ka etsoa ka mokhoa o ikhethileng oa thepa ea ho hloekisa le ea sintering ho ea ka sehlahisoa sa bareki le litlhoko tsa ts'ebetso, 'me e ka kopanngoa hammoho ho fana ka lisebelisoa tsa vacuum degreasing le sintering.
1, graphite thermal field vacuum degreasing sintering lisebelisoa tse kopaneng;
Boitsebiso bo loketseng:
Alloy ea tšepe ea tšepe, tšepe e sa hloekang ka ho fetisisa (17-4ph, 316L, PANACEA, joalo-joalo), tšepe ea tšepe, tšepe ea lebelo le phahameng, joalo-joalo.
Jiehuang MIM e fana ka litharollo tse latelang bakeng sa li-alloys tse joalo tsa tšepe-nickel, tšepe e sa hloekang (17-4ph,316L,PANACEA, joalo-joalo), tšepe ea tšepe, tšepe ea lebelo le holimo, joalo-joalo.
| ID | VHS4415 |
| Nomoro ea mohlala | VHSgr-40/40/150-1600 |
| Nako e sebetsang hantle ea ho sebetsa (mm) | 400×400×1500(mm) |
| Ho jara boima | 300KG |
| Matla a ho futhumatsa/matla kaofela | 240KW/280KW |
| Mocheso oa moralo | 1600 ℃ |
| Mocheso oa ho sebetsa | 1550 ℃ |
| Mokhoa oa ho laola mocheso | Taolo ea mocheso tse peli |
| Boemo bo phahameng ba mocheso | ≤±3℃ |
| Sekhahla sa mocheso | 15 ℃/min (≤1000℃); 10℃/min (1000-1550℃) |
| Vacuum e fokotsang | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa |
| Sekhahla sa ho lutla ha vacuum | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa/h |
| Ho hlahisa boka | ≥98﹪ |
| Sekhahla sa ho pholisa (sebōpi se felletseng)
(Mocheso o kenang oa metsi a pholileng ≤30 ℃, khatello ea sebōpi 9bar) | 1450 ho likhato tse 100, lihora tse 5 ho isa ho tse 7 |
2, tšepe e chesang tšimo vacuum degreasing sintering thepa e kopantsweng;
Boitsebiso bo loketseng
Tšepe e se nang khabone e tlase, alloy ea titanium (Ti, TC4), alloy ea koporo, alloy ea tungsten, superalloy (718, 713), joalo-joalo.
Jiehuang MIM ke letoto la lisebelisoa: tšepe e sa hloekang ea carbon e tlaase, titanium alloy (Ti, TC4), motsoako oa koporo, motsoako oa tungsten, superalloy (718, 713), joalo-joalo Re fana ka tharollo e latelang:
| Nomoro ea mohlala | VHS4412-M |
| Nomoro ea mohlala | VHSmo-42/45/125-1600 |
| Nako e sebetsang hantle ea ho sebetsa (mm) | 420×450×1250(mm) |
| Ho jara boima | 300KG |
| Matla a ho futhumatsa/matla kaofela | 240KW/280KW |
| Mocheso oa moralo | 1600 ℃ |
| Mocheso oa ho sebetsa | 1550 ℃ |
| Mokhoa oa ho laola mocheso | Taolo ea mocheso tse peli |
| Boemo bo phahameng ba mocheso | ≤±3℃ |
| Sekhahla sa mocheso | 15 ℃/min (≤1000℃); |
| Vacuum e fokotsang | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa |
| Sekhahla sa ho lutla ha vacuum | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa/h |
| Ho hlahisa boka | ≥98﹪ |
| Sekhahla sa ho pholisa (sebōpi se felletseng)
(Mocheso o kenang oa metsi a pholileng ≤30 ℃, khatello ea sebōpi 9bar) | 1450 ho likhato tse 100, lihora tse 8 ho isa ho tse 10 |
BOBELI, khatello ea MIM degreasing sintering
Phallo le kenyelletso
Ka sepheo sa bofokoli ba lihlahisoa tse tlaase tsa vacuum sintering process, ho ile ha thehoa sebōpi se kopantsoeng sa khatello ea sintering, se ka eketsang boima ba lihlahisoa ka mocheso o phahameng ka khatello e phahameng ea khase.
1, 1MPa graphite thermal field vacuum khatello ea degreasing sintering lisebelisoa tse kopaneng;
Boitsebiso bo loketseng:
Tungsten carbide, titanium carbide, tantalum carbide, joalo-joalo.
Jiehuang MIM1MPa khatello ea ho theola lintlha tsa sintering:
| ID | PHS4412-1 |
| Nomoro ea mohlala | PHSgr-40/40/120-1600 |
| Nako e sebetsang hantle ea ho sebetsa (mm) | 400×400×1200(mm) |
| Ho jara boima | 600KG |
| Matla a ho futhumatsa/matla kaofela | 240KW/280KW |
| Khatello ea moralo | 1MPa |
| Khatello ea ho sebetsa | 0.96MPa |
| Mocheso oa moralo | 1600 ℃ |
| Mocheso oa ho sebetsa | 1550 ℃ |
| Mokhoa oa ho laola mocheso | Taolo ea mocheso oa mabanta a mararo |
| Boemo bo phahameng ba mocheso | ≤±5℃ |
| Sekhahla sa mocheso | 15 ℃/min (≤1000℃); |
| Vacuum e fokotsang | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa |
| Sekhahla sa ho lutla ha vacuum | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa/h |
| Ho hlahisa boka | ≥98﹪ |
| Sekhahla sa ho pholisa (sebōpi se felletseng)
(Mocheso o kenang oa metsi a pholileng ≤30 ℃, khatello ea sebōpi 9bar) | 1450 ho likhato tse 100, lihora tse tšeletseng ho isa ho tse robeli |
2, 6MPa graphite graphite thermal field vacuum khatello ea degreasing sintering lisebelisoa tse kopaneng;
Boitsebiso bo loketseng
Tungsten carbide, titanium carbide, tantalum carbide, joalo-joalo.
Jiehuang MIM 6MPa khatello e fokotsang lintlha tsa sintering:
| ID | PHS4412-6 |
| Nomoro ea mohlala | PHSgr-40/40/120-1600 |
| Nako e sebetsang hantle ea ho sebetsa (mm) | 400×400×1200(mm) |
| Mojaro o boima | 600KG |
| Matla a ho futhumatsa/matla kaofela | 300KW/340KW |
| Khatello ea moralo | 6MPa |
| Khatello ea ho sebetsa | 5.80MPa |
| Mocheso oa moralo | 1600 ℃ |
| Mocheso oa ho sebetsa | 1550 ℃ |
| Mokhoa oa ho laola mocheso | Taolo ea mocheso oa mabanta a mararo |
| Boemo bo phahameng ba mocheso | ≤±5℃ |
| Sekhahla sa mocheso | 15 ℃/min (≤1000℃); |
| Vacuum e fokotsang | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa |
| Sekhahla sa ho lutla ha vacuum | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa/h |
| Ho hlahisa boka | ≥98﹪ |
| Sekhahla sa ho pholisa (sebōpi se felletseng)
(Mocheso o kenang oa metsi a pholileng ≤30 ℃, khatello ea sebōpi 50bar) | 1450 ho likhato tse 100, lihora tse 6 ho isa ho tse 8 |
3, 10MPa graphite graphite thermal field vacuum khatello ea degreasing sintering lisebelisoa tse kopaneng;
Boitsebiso bo loketseng
Tungsten carbide, titanium carbide, tantalum carbide, joalo-joalo.
Jiehuang MIM 10MPa khatello e fokotsang lintlha tsa sintering:
| ID | PHS4412-10 |
| Nomoro ea mohlala | PHSgr-40/40/120-1600 |
| Nako e sebetsang hantle ea ho sebetsa (mm) | 400×400×1200(mm) |
| Mojaro o boima | 600KG |
| Matla a ho futhumatsa/matla kaofela | 370KW/410KW |
| Khatello ea moralo | 10MPa |
| Khatello ea ho sebetsa | 9.50MPa |
| Mocheso oa moralo | 1600 ℃ |
| Mocheso oa ho sebetsa | 1550 ℃ |
| Mokhoa oa ho laola mocheso | Taolo ea mocheso oa mabanta a mararo |
| Boemo bo phahameng ba mocheso | ≤±5℃ |
| Sekhahla sa mocheso | 15 ℃/min (≤1000℃); |
| Vacuum e fokotsang | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa |
| Sekhahla sa ho lutla ha vacuum | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa/h |
| Ho hlahisa boka | ≥98﹪ |
| Sekhahla sa ho pholisa (sebōpi se felletseng)
(Mocheso o kenang oa metsi a pholileng ≤30 ℃, khatello ea sebōpi 50bar) | 1450 ho likhato tse 100, lihora tse 5 ho isa ho tse 7 |
THARO, khatello ea sepakapaka ea CIM e sintering
Graphite thermal field vacuum degreasing sintering lisebelisoa tse kopaneng;
Mokhoa oa ho bōpa ente ea ceramichaholo-holo e kenyelletsa moralo oa sehlahisoa, moralo oa hlobo, tlhahlobo ea boleng, ho kopanya, ho theha, ho theola, ho sintering, ho sebetsa ha bobeli le lihokelo tse ling tsa 8 tsa bohlokoa, Jiehuang MIMka Customize degreasing le sintering thepa ho latela sehlahiswa le ditlhoko tsa tshebetso ya bareki, 'me e ka kopanngoa hammoho ho fana ka vacuum degreasing le sintering thepa e kopantsweng.
Boitsebiso bo loketseng
Zirconia, alumina, silicon nitride, silicon carbide, joalo-joalo;
Jiehuang CIM tharollo ke e latelang:
Lintlha tse ka sehloohong ke tse latelang:
- Lihlahisoa tse nang le libopeho tse rarahaneng tsa geometri li ka lokisoa ka bolokolohi le ka ho toba.
- Potoloho ea ho theha e khuts'oane, ke nako e mashome a lekholo feela ea nako ea ho tšela le ho hatella e chesang, matla a billet a phahame, tlhahiso e ka etsoa ka mokhoa o ikemetseng, 'me tsamaiso le taolo ea ts'ebetso ea tlhahiso e boetse e loketse, e loketse tlhahiso ea bongata.
- Ka lebaka la metsi a matle a binder, boima ba billet ea ente bo tšoana hantle.
- Ka lebaka la ho eketsoa ha li-binders tse ling ha ho etsoa liente, nako ea ho theoha e telele, haholo-holo bakeng sa lihlahisoa tse nang le botenya bo boholo, nako ea ho senya e ka ba lihora tse 100-200.
- Hobane motsoako oa phofo le li-binder li tšoana haholo, lekhalo pakeng tsa phofo ke le lenyenyane haholo, 'me litšobotsi tsa shrinkage ts'ebetsong ea sintering li tšoana hantle, kahoo sehlahisoa se na le boima bo tšoanang likarolong tsohle le ho nepahala ha geometri.
- Sebaka se sebetsang sa boholo: 400X400X1500mm
- Ho lumellana ha mocheso: ± 3℃
| ID | VHS4415 |
| Nomoro ea mohlala | VHSgr-40/40/150-1800 |
| Nako e sebetsang hantle ea ho sebetsa (mm) | 450×450×1500(mm) |
| Ho jara boima | 300KG |
| Matla a ho futhumatsa/matla kaofela | 240KW/280KW |
| Mocheso oa moralo | 1800 ℃ |
| Mocheso oa ho sebetsa | 1750 ℃ |
| Mokhoa oa ho laola mocheso | 2 libaka |
| Boemo bo phahameng ba mocheso | ≤±3℃ |
| Sekhahla sa mocheso | 15 ℃/min (≤1000℃); 10℃/min (1000-1550℃) |
| Vacuum e fokotsang | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa |
| Sekhahla sa ho lutla ha vacuum | Sebōpi se batang, se se nang letho, se hloekileng, ≤ 2Pa/h |
| Ho hlahisa boka | ≥98﹪ |
| Sekhahla sa ho pholisa (sebōpi se felletseng)
(Mocheso o kenang oa metsi a pholileng ≤30 ℃, khatello ea sebōpi 9bar) | 1450 ho likhato tse 100, lihora tse 5 ho isa ho tse 7 |
Nako ea poso: Dec-06-2023