ʻO ka hoʻoheheʻe ʻia ʻana o ka hoʻoheheʻe ʻia ʻana o ka metala (MIM) a me ka hoʻoheheʻe ceramic injection (CIM) Solutions

ONE.MIM sintering

Kaʻina hana hoʻoheheʻe metala ʻO ka mea nui e pili ana i ka hoʻolālā huahana, ka hoʻolālā mold, ka hoʻāʻo maikaʻi, ka hui ʻana, ka hoʻoheheʻe ʻana, degreasing, sintering, ka hana lua a me nā loulou koʻikoʻi 8 ʻē aʻe, hiki ke hoʻopili ʻia ʻo JH MIM i ka degreasing a me nā mea hana sintering e like me ka mea kūʻai aku huahana a me nā koi kaʻina, a hiki ke hoʻohui pū ʻia e hoʻolako i nā mea hoʻohui i hoʻohui ʻia.

1, graphite thermal kahua vacuum degreasing sintering integrated lako;

Mea kūpono:

ʻO ka hao nickel alloy, ka hapa nui o ke kila kila (17-4ph, 316L, PANACEA, a me nā mea ʻē aʻe), make kila, kiʻekiʻe wikiwiki kila, etc.

Hāʻawi ʻo Jiehuang MIM i kēia mau hopena no nā mea hao-nickel alloys, stainless steel (17-4ph,316L, PANACEA, etc.), die steel, high speed steel, etc. :

2, metala wela kahua vacuum degreasing sintering integrated lako;

Mea kūpono

ʻO ke kila kila haʻahaʻa haʻahaʻa, titanium alloy (Ti, TC4), keleawe keleawe, tungsten alloy, superalloy (718, 713), etc.

ʻO Jiehuang MIM kahi papahana o nā mea: haʻahaʻa-carbon stainless steel, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, superalloy (718, 713), etc. Hāʻawi mākou i kēia mau hopena:

ELUA, MIM kaomi degreasing sintering

Kaʻina hana a me ka hoʻolauna

Ke kuhi nei i ka hemahema o ka haʻahaʻa haʻahaʻa o nā huahana hoʻomaʻamaʻa ʻana i nā huahana, ua hoʻomohala ʻia kahi puʻupuʻu degreasing sintering integrated furnace, hiki ke hoʻonui i ka sintering density o nā huahana i ka wela kiʻekiʻe ma o ke kaomi kinoea kiʻekiʻe.

1, 1MPa graphite thermal kahua mānoanoa kaomi degreasing sintering integrated lako;

Mea kūpono:

Tungsten carbide, titanium carbide, tantalum carbide, etc.

Jiehuang MIM1MPa kaomi degreasing sintering kikoʻī:

2, 6MPa graphite thermal kahua mānoanoa kaomi degreasing sintering integrated lako;

Mea kūpono

Tungsten carbide, titanium carbide, tantalum carbide, etc.

Jiehuang MIM 6MPa kaomi degreasing sintering kikoʻī:

3, 10MPa graphite thermal kahua mānoanoa kaomi degreasing sintering integrated lako;

Mea kūpono

Tungsten carbide, titanium carbide, tantalum carbide, etc.

Jiehuang MIM 10MPa kaomi degreasing sintering kikoʻī:

EKOLU, CIM kaomi lewa hoʻoheheʻe ʻia

Graphite thermal kahua vacuum degreasing sintering lako lako;

Kaʻina hana hoʻoheheʻe seramikaʻO ka mea nui e pili ana i ka hoʻolālā huahana, ka hoʻolālā mold, ka hoʻāʻo ʻana i ka maikaʻi, ka hui ʻana, ka hana ʻana, degreasing, sintering, ka hana lua a me nā loulou koʻikoʻi 8, Jiehuang MIMhiki ke hoʻopilikino i ka degreasing a me ka sintering lako e like me nā mea kūʻai aku 'huahana a me ke kaʻina koi, a hiki ke hoʻohui pū e hoʻolako vacuum degreasing a me ka sintering mea hoʻohui.

Mea kūpono

Zirconia, alumina, silicon nitride, silicon carbide, etc.;

ʻO Jiehuang CIM solution penei:

ʻO nā hiʻohiʻona nui e like me kēia:

1. Hiki ke hoʻomākaukau ʻia nā huahana me nā ʻano geometric paʻakikī.
2. He pōkole ke kaʻina hana, he ʻumi wale nō o ka hapahā o ka ninini ʻana a me ka manawa hoʻoheheʻe wela, ʻoi aku ka ikaika o ka billet, hiki ke hoʻohana ʻia ka hana, a ʻo ka hoʻokele a me ka mālama ʻana i ke kaʻina hana he kūpono hoʻi no ka hana nui.
3. Ma muli o ka maikaʻi o ka wai o ka mea hoʻopaʻa, ʻaʻahu like ka nui o ka billet molding injection.
4. Ma muli o ka hoʻohui ʻana o nā mea paʻa hou aʻe i ka hoʻoheheʻe ʻana, ua lōʻihi ka manawa degreasing, ʻoi aku hoʻi no nā huahana me ka mānoanoa nui, ʻo ka manawa degreasing e like me 100-200 mau hola.
5. No ka mea he ʻano like ka pauka a me ka hui pū ʻana, he liʻiliʻi loa ka ʻāpana ma waena o ka pauka, a ʻo nā hiʻohiʻona shrinkage i ke kaʻina sintering he ʻano like ia, no laila ua like ka huahana i nā ʻāpana āpau a me ka pololei geometric kiʻekiʻe.
6. Nui ʻāpana kūpono: 400X400X1500mm
7. Kaulike mahana: ±3 ℃