ONE.MIM arikuridza
Metal injection molding process zvinonyanya zvinosanganisira kugadzirwa kwechigadzirwa, dhizaini yekugadzira, yemhando yekuyedza, kusanganisa, kuumba, degreasing, sintering, yechipiri kugadzirisa uye zvimwe 8 zvakakosha zvinongedzo, JH MIM inogona kugadziridzwa degreasing uye sintering zvishandiso zvinoenderana nemutengi chigadzirwa uye maitiro ezvinodiwa, uye inogona kubatanidzwa pamwe chete kupa vacuum degreasing uye sintering yakabatanidzwa michina.
1, graphite thermal field vacuum degreasing sintering integrated equipment;
Zvakakodzera:
Iron nickel alloy, yakawanda simbi isina tsvina (17-4ph, 316L, PANACEA, nezvimwewo), simbi inofa, simbi yekumhanya, nezvimwe, nezvimwe.
Jiehuang MIM inopa mhinduro dzinotevera dzesimbi-nickel alloys, simbi isina tsvina (17-4ph,316L,PANACEA, nezvimwewo), simbi inofa, simbi yekumhanya, nezvimwe.
| ID | VHS4415 |
| Nhamba yemuenzaniso | VHSgr-40/40/150-1600 |
| Nguva yekushanda inoshanda (mm) | 400×400×1500(mm) |
| Kutakura uremu | 300KG |
| Kupisa simba / simba rose | 240KW/280KW |
| Dhizaini tembiricha | 1600 ℃ |
| Kushanda tembiricha | 1550 ℃ |
| Temperature control mode | Kudzora tembiricha mbiri |
| Kufanana kwekushisa kwepamusoro | ≤±3℃ |
| Kupisa mwero | 15℃/min(≤1000℃); 10 ℃/miniti (1000-1550 ℃) |
| Kuganhurira vacuum | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa |
| Vacuum leakage rate | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa/h |
| Wax goho | ≥98﹪ |
| Mwero wekutonhora (full furnace)
(Kutonhora kwemvura inopinza tembiricha ≤30 ℃, kudzvanywa kwechoto 9bar) | 1450 kusvika 100 madhigirii, 5 kusvika 7 maawa |
2, simbi inopisa munda vacuum degreasing sintering Integrated midziyo;
Zvinhu zvakakodzera
Yakaderera-kabhoni Stainless simbi, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, superalloy (718, 713), nezvimwe.
Jiehuang MIM nhevedzano yezvinhu: yakaderera-kabhoni Stainless simbi, titanium alloy (Ti, TC4), copper alloy, tungsten alloy, superalloy (718, 713), nezvimwewo Isu tinopa zvinotevera mhinduro:
| Nhamba yemuenzaniso | VHS4412-M |
| Nhamba yemuenzaniso | VHSmo-42/45/125-1600 |
| Nguva yekushanda inoshanda (mm) | 420×450×1250(mm) |
| Kutakura uremu | 300KG |
| Kupisa simba / simba rose | 240KW/280KW |
| Dhizaini tembiricha | 1600 ℃ |
| Kushanda tembiricha | 1550 ℃ |
| Temperature control mode | Kudzora tembiricha mbiri |
| Kufanana kwekushisa kwepamusoro | ≤±3℃ |
| Kupisa mwero | 15℃/min(≤1000℃); |
| Kuganhurira vacuum | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa |
| Vacuum leakage rate | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa/h |
| Wax goho | ≥98﹪ |
| Mwero wekutonhora (full furnace)
(Kutonhora kwemvura inopinza tembiricha ≤30 ℃, kudzvanywa kwechoto 9bar) | 1450 kusvika 100 madhigirii, 8 kusvika 10 maawa |
PIRI, MIM kumanikidza degreasing sintering
Maitiro ekuyerera uye sumo
Tichifunga nezvekushayikwa kwehudhiroti hwevacuum sintering process zvigadzirwa, dhizaini inodzikisira sintering yakasanganiswa choto yakagadziridzwa, iyo inogona kuwedzera sintering density yezvigadzirwa pakupisa kwakanyanya kuburikidza nemhepo yakakwira gasi.
1, 1MPa graphite thermal field vacuum pressure degreasing sintering integrated equipment;
Zvakakodzera:
Tungsten carbide, titanium carbide, tantalum carbide, nezvimwe.
Jiehuang MIM1MPa kudzvinyirirwa degreasing sintering yakatarwa:
| ID | PHS4412-1 |
| Nhamba yemuenzaniso | PHSgr-40/40/120-1600 |
| Nguva yekushanda inoshanda (mm) | 400×400×1200(mm) |
| Kutakura uremu | 600KG |
| Kupisa simba / simba rose | 240KW/280KW |
| Dhizaini yekumanikidza | 1MPa |
| Kumanikidza kushanda | 0.96MPa |
| Dhizaini tembiricha | 1600 ℃ |
| Kushanda tembiricha | 1550 ℃ |
| Temperature control mode | Tatu bhandi tembiricha control |
| Kufanana kwekushisa kwepamusoro | ≤±5℃ |
| Kupisa mwero | 15℃/min(≤1000℃); |
| Kuganhurira vacuum | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa |
| Vacuum leakage rate | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa/h |
| Wax goho | ≥98﹪ |
| Mwero wekutonhora (full furnace)
(Kutonhora kwemvura inopinza tembiricha ≤30 ℃, kudzvanywa kwechoto 9bar) | 1450 kusvika 100 madhigirii, matanhatu kusvika masere maawa |
2, 6MPa graphite thermal field vacuum pressure degreasing sintering integrated equipment;
Zvinhu zvakakodzera
Tungsten carbide, titanium carbide, tantalum carbide, nezvimwe.
Jiehuang MIM 6MPa kudzvanywa degreasing sintering yakatarwa:
| ID | PHS4412-6 |
| Nhamba yemuenzaniso | PHSgr-40/40/120-1600 |
| Nguva yekushanda inoshanda (mm) | 400×400×1200(mm) |
| Mutoro unorema | 600KG |
| Kupisa simba / simba rose | 300KW/340KW |
| Dhizaini yekumanikidza | 6MPa |
| Kumanikidza kushanda | 5.80MPa |
| Dhizaini tembiricha | 1600 ℃ |
| Kushanda tembiricha | 1550 ℃ |
| Temperature control mode | Tatu bhandi tembiricha control |
| Kufanana kwekushisa kwepamusoro | ≤±5℃ |
| Kupisa mwero | 15℃/min(≤1000℃); |
| Kuganhurira vacuum | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa |
| Vacuum leakage rate | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa/h |
| Wax goho | ≥98﹪ |
| Mwero wekutonhora (full furnace)
(Kutonhora kwemvura inopinza tembiricha ≤30 ℃, kudzvanywa kwechoto 50bar) | 1450 kusvika 100 madhigirii, 6 kusvika 8 maawa |
3, 10MPa graphite thermal field vacuum pressure degreasing sintering integrated equipment;
Zvinhu zvakakodzera
Tungsten carbide, titanium carbide, tantalum carbide, nezvimwe.
Jiehuang MIM 10MPa kudzvanywa degreasing sintering yakatarwa:
| ID | PHS4412-10 |
| Nhamba yemuenzaniso | PHSgr-40/40/120-1600 |
| Nguva yekushanda inoshanda (mm) | 400×400×1200(mm) |
| Mutoro unorema | 600KG |
| Kupisa simba / simba rose | 370KW/410KW |
| Dhizaini yekumanikidza | 10MPa |
| Kumanikidza kushanda | 9.50MPa |
| Dhizaini tembiricha | 1600 ℃ |
| Kushanda tembiricha | 1550 ℃ |
| Temperature control mode | Tatu bhandi tembiricha control |
| Kufanana kwekushisa kwepamusoro | ≤±5℃ |
| Kupisa mwero | 15℃/min(≤1000℃); |
| Kuganhurira vacuum | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa |
| Vacuum leakage rate | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa/h |
| Wax goho | ≥98﹪ |
| Mwero wekutonhora (full furnace)
(Kutonhora kwemvura inopinza tembiricha ≤30 ℃, kudzvanywa kwechoto 50bar) | 1450 kusvika 100 madhigirii, 5 kusvika 7 maawa |
ZVITATU, CIM atmospheric pressure sintering
Graphite thermal field vacuum degreasing sintering integrated equipment;
Ceramic injection molding processkunyanya zvinosanganisira kugadzirwa kwechigadzirwa, mold dhizaini, yemhando yekuyedza, kusanganisa, kuumba, degreasing, sintering, yechipiri kugadzirisa uye mamwe 8 akakosha malink, Jiehuang MIMinogona kugadzirisa degreasing uye sintering zvishandiso zvinoenderana nevatengi 'chigadzirwa uye maitiro ezvinodiwa, uye inogona kubatanidzwa pamwe chete kuti ipe vacuum degreasing uye sintering yakabatanidzwa michina.
Zvinhu zvakakodzera
Zirconia, alumina, silicon nitride, silicon carbide, nezvimwewo;
Jiehuang CIM mhinduro ndeyotevera:
Zvinhu zvikuru ndezvizvi:
- Zvigadzirwa zvine maumbirwo akaoma ejometri zvinogona kugadzirirwa zvakasununguka uye zvakananga.
- Iyo yekugadzira denderedzwa ipfupi, makumi chete ezana rimwe-zana rekudururwa uye kupisa kudzvanya kuumba nguva, simba rebillet rakakwira, kugadzirwa kunogona kuve otomatiki, uye manejimendi uye kutonga kwemaitiro ekugadzira zvakare nyore, akakodzera kugadzirwa kwakawanda.
- Nekuda kwemvura yakanaka yebhainda, kuwanda kwejekiseni rekuumba billet rakafanana.
- Nekuda kwekuwedzera kwemamwe mabhaidhi mukuumbwa kwejekiseni, nguva yekudonha yakareba, kunyanya kune zvigadzirwa zvine ukobvu hukuru, nguva yekudonha inogona kunge yakareba maawa 100-200.
- Nekuti poda uye binder musanganiswa wakanyanya yunifomu, mukaha uripo pakati pehupfu idiki, uye shrinkage maitiro mukuita sintering zvakangofanana, saka chigadzirwa chine yunifomu density muzvikamu zvese uye yakakwirira geometric kururama.
- Inoshanda nzvimbo saizi: 400X400X1500mm
- Tembiricha kufanana: ± 3 ℃
| ID | VHS4415 |
| Nhamba yemuenzaniso | VHSgr-40/40/150-1800 |
| Nguva yekushanda inoshanda (mm) | 450×450×1500(mm) |
| Kutakura uremu | 300KG |
| Kupisa simba / simba rose | 240KW/280KW |
| Dhizaini tembiricha | 1800 ℃ |
| Kushanda tembiricha | 1750 ℃ |
| Temperature control mode | 2 nzvimbo |
| Kufanana kwekushisa kwepamusoro | ≤±3℃ |
| Kupisa mwero | 15℃/min(≤1000℃); 10 ℃/miniti (1000-1550 ℃) |
| Kuganhurira vacuum | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa |
| Vacuum leakage rate | Inotonhora, isina chinhu, choto chakachena, ≤ 2Pa/h |
| Wax goho | ≥98﹪ |
| Mwero wekutonhora (full furnace)
(Kutonhora kwemvura inopinza tembiricha ≤30 ℃, kudzvanywa kwechoto 9bar) | 1450 kusvika 100 madhigirii, 5 kusvika 7 maawa |
Nguva yekutumira: Zvita-06-2023